Volume Converter
Convert liquid volume between liters, milliliters, gallons, quarts, pints, cups and fluid ounces. The converter uses US liquid measures unless stated otherwise.
Enter a value to convert.
US and imperial volume units
Volume units are a common source of confusion because the US and UK systems share names but not sizes. A US gallon is 3.785 litres, while an imperial (UK) gallon is 4.546 litres — about 20% larger.
| Unit | Milliliters | Notes |
|---|---|---|
| 1 US teaspoon | 4.929 mL | 1/6 US fluid ounce |
| 1 US tablespoon | 14.787 mL | 3 teaspoons |
| 1 US cup | 236.588 mL | 8 US fluid ounces |
| 1 US pint | 473.176 mL | 2 cups |
| 1 US quart | 946.353 mL | 2 pints |
| 1 US gallon | 3,785.412 mL | 4 quarts |
The UK pint is 568.261 mL, and the UK fluid ounce is 28.413 mL. Recipes from British sources may use these larger units.
Choosing the right unit
Milliliters and liters are best for drinks, medicine and fuel. Cups and spoons are convenient for cooking. Gallons are common for fuel and large containers in the US.
How to convert volume
Each unit is defined as a multiple of the liter. Multiply by the from-factor and divide by the to-factor:
For example, to convert 2 US gallons to liters:
Worked examples
- 1 cup to milliliters: 236.588 mL.
- 500 mL to cups: 500 ÷ 236.588 = 2.11 cups.
- 1 US gallon to liters: 3.785 L.
- 1 UK gallon to liters: 4.546 L.
When following a recipe, measure liquids in a transparent jug at eye level. For small amounts, use measuring spoons rather than kitchen spoons, which vary in size.
How to check the result
Water gives a free reality check. One millilitre of water has a mass of about one gram, so 500 mL should weigh roughly 500 g. A label showing 460 g for 500 mL implies a density of 0.92, which is typical of cooking oil rather than water. Cup counts follow the same logic: one US cup is 8 fluid ounces, so 3 cups must be 24 fl oz, or 3 x 236.588 = 709.76 mL. Convert back with the reciprocal factor to confirm, and remember that US and UK measures agree only on metric units such as millilitres and litres.
Common mistakes to avoid
- Scaling cup fractions by eye. 1 3/4 cups doubled is 3 1/2 cups, or 3.5 x 236.588 = 828.06 mL. Writing "about 3 1/2" and then rounding the millilitres separately can drift by 30 mL or more.
- Estimating half measures. Half of 3/4 cup is 6 tablespoons, and 6 x 14.787 = 88.72 mL, the same as 0.375 x 236.588. Guessing "a bit under half a cup" is where baking ratios break.
- Swapping volume for weight without density. 250 mL of honey weighs about 355 g, nearly 1.4 times what the same volume of water weighs.
What changes the number most
Which definition of the unit you use outweighs everything else. Moving from a US gallon to an imperial gallon changes the litre figure from 3.785 to 4.546, a difference of roughly 20%, larger than any rounding done in a kitchen. Within one system the chain is exact: 1 gallon is 4 quarts, 8 pints, 16 cups and 128 fluid ounces, so a mistake usually means a step was skipped rather than a factor being vague. For small measures the teaspoon is tightest, at 4.929 mL, and rounding it to 5 mL adds about 1.4% per spoon — harmless twice, noticeable across twenty.
When to use this calculator
Volume conversion is routine in the kitchen, at the pump and in the aquarium, but each setting tolerates a different error. Decide the job before choosing how many decimals to keep.
- Recipes. Small measures matter most. One US tablespoon is 14.787 mL, so a recipe calling for 4 tbsp needs 59.15 mL; a 15 mL metric tablespoon adds 0.85 mL across those four spoons.
- Fuel. A US gallon is 3.785 L, so a 12-gallon fill is 45.42 L. Pumps in most countries sell in litres, and the receipt is the figure to compare, not the tank size in the manual.
- Aquariums and ponds. A 20 US gallon tank holds 75.71 L, but the usable volume is lower once gravel and decorations displace water. Gravel and rock can take 10–15%, so that tank may hold closer to 65 L.
- Cleaning products and sprayers. A 5 L sprayer needs 500 mL of concentrate for a 10% mix, or 100 mL for a 2% mix. Measure the concentrate in millilitres and the water in litres, then check the total reaches 5 L.
Keep the original measurement and the conversion side by side until the task is finished. Rounding a converted figure and then converting back can drift by a spoonful, which is harmless in soup and not in a medication dose.
For anything medical, use the millilitre figure printed on the packaging rather than a kitchen conversion at all.
Frequently asked questions
Is a US gallon the same as a UK gallon?
No. A US gallon holds 3.785 litres, while an imperial UK gallon holds 4.546 litres, about 20 percent more. This converter assumes US liquid gallons, quarts, pints, cups and fluid ounces unless you pick otherwise.
How many cups are in a liter?
One litre equals about 4.227 US cups, since a US cup is 236.588 millilitres. Metric recipes often round to four cups per litre, which is close enough for most cooking but slightly off for precise baking.
How many milliliters are in a teaspoon?
A US teaspoon holds 4.929 millilitres, and a metric teaspoon holds exactly 5 millilitres. The 0.07 millilitre gap rarely matters in cooking, though it can shift a carefully scaled pharmaceutical or baking measurement. Most countries sell metric spoons, so the gap rarely matters.
Is a fluid ounce the same as an ounce of weight?
No. A fluid ounce measures volume while an ounce measures mass. One US fluid ounce of water weighs about 29.57 grams, but honey or oil in the same volume weighs noticeably more because density differs.
Why do UK recipes use larger cups?
British and Commonwealth recipes historically used a 250-millilitre cup, while the US standard is 236.588 millilitres. That 13-millilitre gap rarely ruins a dish, but it can affect bread, pastry and other ratio-sensitive recipes. Scaling the recipe up multiplies that error.
Sources & methodology
- National Institute of Standards and Technology — SI conversion factors.
- UK Government — weights and measures legislation for imperial units.
- Calculation method: exact US liquid volume definitions, value × (from factor ÷ to factor).
Results are estimates for general information. For medical, legal or financial decisions, confirm with a qualified professional.