Cooking Measurement Converter

Convert cooking volumes between cups, tablespoons, teaspoons, fluid ounces, milliliters and liters. Ideal for following recipes from different countries.

Conversions • Cups, spoons & mL • US measures • Updated November 18, 2026 • Reviewed by the GlobalCalcly editorial team
Unit conversion Choose units and enter a value
From and to
Factors use exact international definitions, so results are not rounded by the converter.
Converted value
—

Enter a value to convert.

Conversion rate —
Reverse rate —
Category Cooking volume
Formula —

Common cooking equivalents

Most cooking conversions are volume-based. The US system is the most common source of recipes online, so it helps to know the standard equivalents by heart.

MeasureEquivalent
1 tablespoon3 teaspoons
1 fluid ounce2 tablespoons
1 cup8 fluid ounces, 16 tablespoons
1 cup236.588 mL
1 pint2 cups
1 quart4 cups
1 gallon16 cups

Australian tablespoons are 20 mL, not 15 mL, so a recipe from Australia may need adjustment. Metric cups are 250 mL, while US cups are 236.588 mL.

Volume is not weight

Converting cups to grams depends on the ingredient. A cup of flour weighs about 120–125 g, a cup of granulated sugar about 200 g, and a cup of water about 237 g. For baking, a kitchen scale gives much more consistent results than volume measures.

How to convert cooking measures

result = value × (factorfrom ÷ factorto)

For example, to convert 2 cups to milliliters:

2 × 236.5882365 = 473.18 mL

Worked examples

  • 1 cup to tablespoons: 16 tbsp.
  • 3 teaspoons to milliliters: 3 × 4.92892159375 = 14.79 mL.
  • 250 mL to cups: 250 ÷ 236.588 = 1.06 cups.
  • 1 liter to cups: 1,000 ÷ 236.588 = 4.23 cups.

When halving a recipe, it is often easier to convert everything to milliliters first, then divide. This avoids awkward fractions of cups and spoons.

Common mistakes to avoid

  • Scooping flour straight from the bag. A dipped cup can hold 150 g, while a spooned and levelled cup holds about 120–125 g. That 20% gap changes the texture of cakes and bread.
  • Using a liquid jug for dry ingredients. Below about 50 mL the meniscus and spout make a jug unreliable; use dry cups or a scale for flour, sugar and cocoa.
  • Packing brown sugar when the recipe does not ask. Packed sugar adds roughly 20% more mass per cup, which shifts sweetness and moisture.
  • Measuring over the mixing bowl. An overpour of salt or baking powder cannot be removed. Measure into a separate dish first.
  • Assuming every tablespoon is 15 mL. The US tablespoon is 14.787 mL and the Australian one is 20 mL, a 35% difference that is enough to unbalance a dressing.

How to choose between options

Work in millilitres when the recipe is metric or when you plan to scale it, because the numbers multiply cleanly. Stay with cups and spoons for US recipes written that way and keep the familiar fractions: one third of a cup is easier to judge than 78.86 mL. Above about 60 mL a jug beats repeated spoonfuls.

For baking by weight, convert the volume once using the ingredient density and then work in grams. Butter is convenient because 1 US tablespoon is about 14.2 g and 1 US cup about 227 g.

How to check the result

Cross-check with a relationship you already know: four tablespoons must equal one quarter cup. Three tablespoons convert to 3 × 14.7868 = 44.36 mL, so a fourth adds 14.79 mL and lands on 59.15 mL, which should match 236.588 ÷ 4 = 59.15 mL. If those figures disagree, the tablespoon size in use is not the US one.

Water offers a second check outside the volume system: 250 mL of water weighs 250 g, so a metric cup of water is 250 g. The same shortcut fails for oil at about 0.92 g/mL, and fails badly for flour.

What to do with the result

A converted measurement is only the first step in scaling a recipe. Multiply every volume by the same factor, then decide which ingredients need a different treatment.

Eggs are the awkward one. A large egg weighs about 50 g without its shell, so a recipe scaled by 1.5 needs 75 g of egg, not "one and a half eggs" guessed by eye. Beat one egg, weigh 75 g, and save the rest for another use.

Flour is easier by weight. If a cup of flour is 120 g, a recipe using 2 cups has 240 g; at 1.5× that is 3 cups or 360 g. Weighing is faster than levelling three cups and gives the same result every time.

Leaveners and salt do not always scale linearly. Baking powder is usually increased slightly less than the other ingredients in a large batch, and salt should be tasted rather than multiplied blindly. Start with the linear amount, then adjust on the next bake.

Pan size does not scale with volume either: a recipe doubled in volume needs a larger tin or two tins, not a longer time in the same one. Fill tins to the same depth as the original recipe and expect the baking time to stay closer to the original than the volume ratio suggests.

Write the scaled quantities down before starting. Converting while mixing is where a doubled recipe becomes a tripled one.

Frequently asked questions

How many tablespoons are in a cup?

One US cup holds 16 US tablespoons, because a cup is 8 fluid ounces and each ounce is 2 tablespoons. Australian tablespoons are larger, so check the recipe origin before using this ratio abroad. Half a cup is therefore 8 tablespoons.

How many milliliters are in a teaspoon?

In US measures a teaspoon is 4.929 millilitres, while the metric teaspoon is exactly 5 millilitres. The difference is tiny per spoon but reaches about 1.4 millilitres across a full tablespoon. Three teaspoons make one tablespoon in US recipes, so errors stay small.

Can I convert cups to grams?

Not directly, because grams measure mass and cups measure volume. One cup of flour is about 120 grams but one cup of honey is roughly 340 grams, so use a scale and the ingredient density.

Why is an Australian tablespoon different?

Australia standardised a 20-millilitre tablespoon, larger than the 15-millilitre metric spoon and the 14.787-millilitre US spoon. Using the wrong one across four tablespoons shifts a recipe by about 20 millilitres. Always check the source country before measuring dry ingredients.

Is a US cup the same as a metric cup?

No. A US cup is 236.588 millilitres and a metric cup is 250 millilitres, about 5.7 percent larger. In a recipe with four cups of liquid, that gap adds roughly 54 millilitres. Weighing solid ingredients in grams avoids the ambiguity entirely.

Sources & methodology

Results are estimates for general information. For medical, legal or financial decisions, confirm with a qualified professional.