Temperature Converter
Convert between Celsius, Fahrenheit and Kelvin. Unlike length or weight, temperature scales have different zero points, so the converter uses offset formulas instead of simple multiplication.
Enter a value to convert.
The three common temperature scales
Celsius and Fahrenheit are the scales most people use day to day. Kelvin is the scientific scale: it starts at absolute zero, so it has no negative values and is used in physics and chemistry.
| Reference | Celsius | Fahrenheit | Kelvin |
|---|---|---|---|
| Absolute zero | −273.15 °C | −459.67 °F | 0 K |
| Water freezes | 0 °C | 32 °F | 273.15 K |
| Room temperature | 20 °C | 68 °F | 293.15 K |
| Body temperature | 37 °C | 98.6 °F | 310.15 K |
| Water boils | 100 °C | 212 °F | 373.15 K |
The Fahrenheit scale has 180 degrees between freezing and boiling, while Celsius has 100, which is why a Fahrenheit degree is smaller: 1 °F change equals 5/9 of a Celsius degree.
Where each scale is used
Celsius is used in most of the world, Fahrenheit mainly in the United States, and Kelvin in science and engineering. Weather apps, ovens and thermometers often let you switch between them.
Temperature conversion formulas
Fahrenheit to Celsius: (°F − 32) × 5 ÷ 9
Celsius to Kelvin: °C + 273.15
Kelvin to Celsius: K − 273.15
Fahrenheit to Kelvin: (°F − 32) × 5 ÷ 9 + 273.15
Worked examples
- 20 °C to °F: (20 × 9 ÷ 5) + 32 = 68 °F.
- 98.6 °F to °C: (98.6 − 32) × 5 ÷ 9 = 37 °C.
- 0 K to °C: 0 − 273.15 = −273.15 °C.
A useful shortcut for weather is to double the Celsius value and add 30: 20 °C becomes about 70 °F. It is not exact, but it is close enough for a quick estimate.
Common mistakes to avoid
- Converting a temperature difference as if it were a reading. A 10 °C rise is an 18 °F rise (10 x 9 / 5), not 50 °F. The 32-degree offset belongs only to absolute temperatures.
- Working the Fahrenheit formula out of order. Subtract 32 first, then multiply by 5/9. Doing it the other way turns 350 °F into 194.44 - 32 = 162.44 °C instead of the correct 176.67 °C.
- Adding an offset to Kelvin. That scale starts at absolute zero: 300 K is 300 - 273.15 = 26.85 °C, and a 1 K change equals a 1 °C change.
How to check the result
Anchor the answer against two fixed points: water freezes at 0 °C, 32 °F or 273.15 K and boils at 100 °C, 212 °F or 373.15 K. Any reading between them must convert to a value between the matching pair. The scales cross at -40, so -40 °C and -40 °F describe the same temperature, which makes a quick test of sign handling. Reversing the conversion must return the input: 180 °C is 356 °F, and (356 - 32) x 5 / 9 = 180.
What changes the number most
The 32-degree offset dominates near freezing and fades as values climb. At 0 °C that offset accounts for the entire Fahrenheit reading of 32; at 100 °C it contributes under a fifth of 212. The gap between 5 °C and 10 °C therefore looks wide on a Fahrenheit thermometer, at 41 versus 50, while the same two readings differ by just 5 Celsius degrees. Degree size works the other way: one Celsius degree spans 1.8 Fahrenheit degrees, so any interval converts with that single factor and no offset at all. Kelvin shares that degree size, which is why 20 °C to 30 °C is also 293.15 K to 303.15 K, an interval of exactly 10 K.
Limits you should know
The converter changes a temperature scale. It does not translate every number that looks like a temperature, and three cases catch people out.
Fan ovens. A recipe written for a conventional oven at 180 °C is usually reduced by about 20 °C for a fan oven, to 160 °C. That adjustment is a cooking convention, not a unit conversion: 180 °C is always 356 °F, but the fan setting that produces the same result is a different temperature.
Gas marks. British recipes may give a gas mark instead of degrees. Gas mark 4 corresponds to 180 °C or 350 °F, and each mark steps in 25 °F increments rather than a fixed Celsius amount. The converter cannot accept gas marks, so look up the mark first.
Feels-like readings. Wind chill and heat index are apparent temperatures calculated from air temperature, wind and humidity. A forecast of 0 °C with a 30 km/h wind may quote −5 °C feels-like; converting that −5 °C to 23 °F is arithmetically right but describes the apparent value, not the air.
Thermostats add a fourth wrinkle: the number on the dial is a set point, and the room may sit a degree or two either side of it. Convert the set point for a recipe or a manual, then measure the actual temperature separately if the result matters.
Frequently asked questions
What is 100 °F in Celsius?
100 °F converts to 37.78 °C using (100 − 32) × 5 ÷ 9. Water boils at 212 °F, which is 100 °C, so the halfway value sits close to normal human body temperature of about 37 °C.
Why does Kelvin have no degree symbol?
Kelvin belongs to the absolute thermodynamic scale, so it measures from absolute zero rather than from a freezing point. That is why the unit is written K alone, without the degree sign used by Celsius and Fahrenheit.
Is 0 °C the same as 0 K?
No. Zero degrees Celsius is the freezing point of water, equal to 273.15 K, whereas zero kelvin is absolute zero at −273.15 °C. The two scales share the same step size, only the starting point differs.
Which temperature scale does the US use?
The United States mainly uses Fahrenheit for weather forecasts, oven settings and everyday conversation. Scientists there use Celsius, and nearly every other country reports temperatures in Celsius, so both scales appear in international data. Travel apps often let users switch between them.
Can temperatures be below absolute zero?
No, absolute zero is the theoretical floor where particle motion reaches its minimum. Nothing can be colder, so a negative kelvin reading is not physically meaningful. The converter still accepts it mathematically if you type one.
Sources & methodology
- National Institute of Standards and Technology — SI units and temperature.
- International Bureau of Weights and Measures (BIPM) — SI brochure.
- Calculation method: standard Celsius, Fahrenheit and Kelvin offset formulas.
Results are estimates for general information. For medical, legal or financial decisions, confirm with a qualified professional.