Area Converter

Convert area between square meters, square feet, acres, hectares and other common units. Useful for property, flooring, land and construction measurements.

Conversions • Square & land measures • Exact factors • Updated November 18, 2026 • Reviewed by the GlobalCalcly editorial team
Unit conversion Choose units and enter a value
From and to
Factors use exact international definitions, so results are not rounded by the converter.
Converted value
—

Enter a value to convert.

Conversion rate —
Reverse rate —
Category Area
Formula —

Area units and where they are used

Square meters and square feet are the everyday units for rooms and buildings. Acres and hectares are used for land. Square yards appear in flooring and landscaping, especially in the US and UK.

FromToExact value
1 square metersquare feet10.7639104 ft²
1 square footsquare meters0.09290304 m²
1 square yardsquare feet9 ft²
1 acresquare feet43,560 ft²
1 hectaresquare meters10,000 m²
1 acrehectares0.40468564224 ha

One hectare is 10,000 square meters, or a square 100 meters on each side. One acre is about 4,047 square meters, slightly smaller than half a hectare.

Why area factors are squared

A square meter is a square with one-meter sides. Because area is length squared, an area conversion factor is the square of the corresponding length factor. A foot is 0.3048 m, so a square foot is 0.3048² = 0.09290304 m².

How to convert area

result = value × (factorfrom ÷ factorto)

For example, to convert 1,200 square feet to square meters:

1,200 × 0.09290304 = 111.48 m²

Worked examples

  • 100 m² to square feet: 100 × 10.7639104 = 1,076.39 ft².
  • 0.5 acres to square meters: 0.5 × 4,046.8564224 = 2,023.43 m².
  • 2 hectares to acres: 2 × (10,000 ÷ 4,046.8564224) = 4.94 acres.

For irregular rooms, measure each section separately and add the areas. For triangles, use half the base times the height.

Common mistakes to avoid

  • Using a linear factor for an area. 12 m² x 3.28084 = 39.37, which is a length answer to an area question. The correct conversion is 12 x 10.7639104 = 129.17 ft².
  • Doubling instead of squaring. A room twice as long on each side has four times the floor area, not twice, because both dimensions contribute.
  • Confusing perimeter with area. Skirting boards run in metres along the walls; flooring covers square metres across the floor. Ordering timber by the floor area, or carpet by the wall length, under- or over-buys badly.

How to check the result

Work back through the linear dimensions. A 3 m by 4 m room is 12 m², and in feet it measures 9.84 ft by 13.12 ft, which multiplies to about 129 ft² and matches 12 x 10.7639 = 129.17. If the two routes differ by roughly 10.76 or 0.093, a linear factor slipped in. Land figures deserve a second check against familiar anchors: an acre is 43,560 ft² and a hectare is 10,000 m², so 2 hectares is 20,000 m², or 20,000 / 4,046.86 = 4.94 acres. Square inches and square centimetres follow the same rule, since 1 in² is 2.54² = 6.4516 cm².

What changes the number most

Length is the lever, because area grows with its square. Extend a 3 m by 4 m room by 10% on both sides and the floor rises from 12 m² to 3.3 x 4.4 = 14.52 m², a 21% gain from a 10% change per side. Extend only the 4 m wall by 10% and the result is 3 x 4.4 = 13.2 m², a gain of 10%. That is why a small measuring error on a long wall costs more than the same error on a short one, and why a quoted floor area for an irregular room should be checked against its individual dimensions.

What to do with the result

A converted area is a measurement, not an order. Flooring, tiles and paint all need a waste allowance, and the allowance should be added after conversion, in the unit you are buying.

For flooring, add 5% for a simple rectangular room and 10% where there are alcoves, diagonal layouts or many cuts. A 12 m² room becomes 12.6 m² at 5% and 13.2 m² at 10%.

Tiles are sold by the box, so divide the adjusted area by the coverage per box and round up. With 60 cm × 60 cm tiles, each tile covers 0.36 m² and a box of four covers 1.44 m². The 13.2 m² figure needs 13.2 ÷ 1.44 = 9.17 boxes, so buy 10.

Paint follows a different rule. Wall area is the perimeter times the height, minus doors and windows, and a litre typically covers 10–12 m² per coat. A room with 14 m of wall and a 2.4 m ceiling has 33.6 m² of wall; two coats need 67.2 m² of coverage, or about 6 L at 12 m² per litre.

For land, the result is usually for comparison rather than purchase, so keep the converted figure unrounded until you have compared plots. A 0.4 hectare plot is 4,000 m² or 0.99 acres, and a price per acre can shift on that last hundredth. Keep the square metre figure as the working number, because most land registries and survey plans use it.

Frequently asked questions

How many square feet are in a square meter?

One square metre equals 10.7639104 square feet, so a 50-square-metre flat is about 538 square feet. Divide square feet by 10.7639104 to reverse the conversion, and the answer updates as you type. Metric and imperial listings often show both figures.

How many square feet are in an acre?

An acre contains exactly 43,560 square feet, equivalent to about 4,046.86 square metres. Picture a square roughly 208.7 feet on each side, or a strip one foot wide and 8.25 miles long. Surveyors still use acres for rural land in the US.

How big is a hectare?

A hectare is 10,000 square metres, the area of a square 100 metres on each side. That equals about 2.471 acres, so a 10-hectare field covers slightly less than 25 acres. Farm yields are usually quoted per hectare in metric countries.

Is a square yard the same as a yard?

No. A yard is a length of 0.9144 metres, while a square yard is an area of 0.83612736 square metres. A square yard is the space inside a square with one-yard sides, so the two units are not interchangeable.

How do I measure an irregular room?

Break the room into rectangles and triangles, compute each area separately, then add the pieces. Round the total up by 5 to 10 percent when buying flooring, tiles or paint to cover offcuts and mistakes.

Sources & methodology

Results are estimates for general information. For medical, legal or financial decisions, confirm with a qualified professional.