IRR Calculator
Enter the cash flows for each period, starting with the initial investment as a negative number. The calculator finds the discount rate that makes the net present value zero.
Enter the cash flow stream to calculate the IRR.
What the internal rate of return means
The internal rate of return is the discount rate at which an investment breaks even in present-value terms. If the cash flows are discounted at the IRR, their net present value is zero. It is often compared with a required return or cost of capital: a project with an IRR above that hurdle is expected to create value.
The first cash flow is normally the initial investment and is entered as a negative number. Later cash flows can be positive or negative, depending on whether money is coming in or going out.
How it is calculated
CF₀ is usually negative · r is the IRR
There is no simple closed-form solution for most cash flow streams, so the rate is found by iteration. The calculator searches for the rate that brings the net present value to zero within a very small tolerance.
Worked example
An investment of 10,000 followed by inflows of 3,000, 4,200, 6,800 and 2,000 has a total inflow of 16,000. The IRR is about 21.6%. At a 10% comparison rate the same stream has a positive NPV, which confirms that the project clears the hurdle.
IRR versus NPV
NPV tells you how much value an investment adds in currency terms. IRR tells you the percentage return, which is easier to compare across projects of different sizes. When the two methods disagree about ranking projects, NPV is generally the more reliable guide because it reflects absolute value added.
Assumptions behind IRR
The IRR assumes that interim cash flows can be reinvested at the IRR itself. That is often unrealistic: a project returning 25% may not be able to reinvest its early cash flows at 25%. The modified internal rate of return (MIRR) addresses this by using a separate reinvestment rate.
It also assumes conventional cash flows, with an initial outflow followed by inflows. When the signs change more than once, there can be multiple IRRs or none, and the result becomes ambiguous.
When the result is unavailable
If every cash flow has the same sign, there is no meaningful IRR and the calculator returns a dash. The same happens when no rate in the search range produces a zero NPV. In those cases, use NPV at a sensible discount rate instead.
Comparing projects
A small project with a high IRR may add less value than a larger project with a lower IRR. Use IRR alongside NPV, payback and the capital available. Also consider risk: a high IRR in a speculative venture is not equivalent to a lower IRR in a stable one.
Periods and timing
This calculator assumes each cash flow occurs at the end of a period and that periods are evenly spaced. If your flows are monthly, the result is a monthly IRR; multiply or compound appropriately to annualise it. For irregular dates, use a tool that supports dated cash flows.
Practical uses
IRR is common in capital budgeting, real estate, private equity and equipment purchases. It is also used to compare savings or investment products with different contribution schedules. Treat it as one input to a decision, not the decision itself.
Common mistakes to avoid
Leaving the initial investment positive is the first error. If all the cash flows share a sign, no discount rate can produce a zero net present value, and the calculator returns a dash rather than a number.
The second is mixing periods. Monthly cash flows produce a monthly IRR, and quoting it as an annual figure without compounding overstates the return. Twelve monthly periods at 1% compound to 12.68% a year, not 12%.
Third, do not assume the answer is unique. When the cash flows change sign more than once, as with a mine that needs restoration spending at the end, there can be two IRRs or none.
Fourth, do not rank projects by IRR alone. A small project with a high percentage can add less value than a large one with a lower rate.
How to check the result
Discount the cash flows at the reported rate and add them up. An outflow of 5,000 followed by three inflows of 2,000 gives an IRR near 9.7%, and discounting each inflow at that rate returns 1,823, 1,662 and 1,515, which sum to 5,000.
Check one rate either side. At 10% the same inflows are worth 4,973.8, slightly less than 5,000, so the true rate must sit just below 10%. That single comparison confirms both the sign and the magnitude.
Then look at the sign pattern. If it changes once, the IRR is reliable. If it changes twice or more, use NPV at your cost of capital instead.
When to use this calculator
Use it to compare investments of similar size, to communicate a return to people who think in percentages, and to test a project against a hurdle rate. It is common in capital budgeting, equipment purchases, private equity and property.
Prefer NPV when projects differ in scale or when cash flows are unconventional, and treat IRR as one input rather than the decision itself.
Frequently asked questions
Why is the first cash flow negative?
It represents money you pay out at the start, such as the purchase price or the build cost. Later positive values are the returns or savings the investment generates, and the sign pattern is what makes a solution possible.
Can the IRR be negative?
Yes. A negative IRR means the cash flows return less than the money invested, in present-value terms. It appears when the total inflows are smaller than the initial outflow, or when early costs outweigh the later returns.
What does an IRR of 20% mean?
It means the cash flow stream returns the equivalent of 20% per period, compounded, while it runs. Money left in the project grows at that rate, and any cash taken out is assumed to be reinvested at the same 20%.
Why might the calculator show no result?
Either every cash flow has the same sign, or no rate in the search range produces a zero net present value. Check for a missing negative sign, and if the pattern is genuinely unusual, use NPV at a sensible discount rate.
Is a higher IRR always better?
No. A smaller project can post a higher percentage while adding less absolute value than a larger one. Compare NPV as well, and weigh the risk behind each forecast, because a speculative 40% is not equal to a stable 15%.
Sources & methodology
- CFA Institute — capital budgeting and internal rate of return.
- Calculation method: iterative search for the discount rate that sets net present value to zero.
Educational information only — not financial, tax or investment advice. Confirm important decisions with a qualified professional.